topic Re: SOST: Error Message cannot be processed as it cannot be converted in Application Development and Automation Discussions

SOST: Error Message cannot be processed as it cannot be converted

Former Member — Thu, 02 Oct 2008 07:51:49 GMT

I am sending Email of XLS Document thru my program,

but in SOST i got Error Message cannot be processed as it cannot be converted.

i used FM SO_DOCUMENT_SEND_API1 and after Sy-subrc of Fm is = 0

i used SUBMIT rsconn01 WITH mode = 'INT'

WITH output = 'X'

AND RETURN.

Can any one guide me on the finding out the error in this?

Re: SOST: Error Message cannot be processed as it cannot be converted

Former Member — Thu, 02 Oct 2008 08:41:58 GMT

Check the below code. It may help you. First you need to convert the file into OTF.

DATA: NUMBYTES TYPE TST01-DSIZE,

PDFSPOOLID TYPE TSP01-RQIDENT.

DATA: BEGIN OF PDFDATA OCCURS 0.

INCLUDE STRUCTURE TLINE.

DATA: END OF PDFDATA.

DATA: G1_LINES_TXT TYPE I.

DATA : L_DOCUMENT_DATA TYPE SODOCCHGI1,

T_PACKING_LIST TYPE STANDARD TABLE OF SOPCKLSTI1,

W_OBJHEAD TYPE SOLI_TAB,

T_OBJBIN TYPE STANDARD TABLE OF SOLISTI1,

T_OBJTXT TYPE STANDARD TABLE OF SOLISTI1,

LW_PACKING_LIST TYPE SOPCKLSTI1,

L_LINES TYPE I,

W_RECEIVER TYPE SOMLRECI1,

T_RECEIVER TYPE STANDARD TABLE OF SOMLRECI1.

DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.

DATA: OBJHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.

DATA: OBJBIN LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.

DATA: OBJTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.

DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.

DATA: DOC_CHNG LIKE SODOCCHGI1.

DATA: TAB_LINES LIKE SY-TABIX.

SELECT MAX( RQIDENT ) INTO G_SPOOL_NUM

FROM TSP01

WHERE RQCLIENT = SY-MANDT AND

RQOWNER = SY-UNAME.

*....Convert Spool to PDF

CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'

EXPORTING

SRC_SPOOLID = G_SPOOL_NUM

NO_DIALOG = 'X'

DST_DEVICE = G_PDEST

IMPORTING

PDF_BYTECOUNT = NUMBYTES

TABLES

PDF = PDFDATA

EXCEPTIONS

ERR_NO_ABAP_SPOOLJOB = 1

ERR_NO_SPOOLJOB = 2

ERR_NO_PERMISSION = 3

ERR_CONV_NOT_POSSIBLE = 4

ERR_BAD_DESTDEVICE = 5

USER_CANCELLED = 6

ERR_SPOOLERROR = 7

ERR_TEMSEERROR = 8

ERR_BTCJOB_OPEN_FAILED = 9

ERR_BTCJOB_SUBMIT_FAILED = 10

ERR_BTCJOB_CLOSE_FAILED = 11

OTHERS = 12.

*...Convert 132 char to 255 char

LOOP AT PDFDATA.

TRANSLATE PDFDATA USING ' ~'.

CONCATENATE GD_BUFFER PDFDATA INTO GD_BUFFER.

ENDLOOP.

TRANSLATE GD_BUFFER USING '~ '.

DO.

IT_MESS_ATT = GD_BUFFER.

APPEND IT_MESS_ATT.

SHIFT GD_BUFFER LEFT BY 255 PLACES.

IF GD_BUFFER IS INITIAL.

EXIT.

ENDIF.

ENDDO.

Creating the document attachment

LOOP AT IT_MESS_ATT.

OBJBIN = IT_MESS_ATT.

APPEND OBJBIN.

CLEAR: OBJBIN,

IT_MESS_ATT.

ENDLOOP.

Creating the document to be sent

DOC_CHNG-OBJ_NAME = 'IG Balance'.

*.....Subject of the email.

CONCATENATE 'Intragroup Confirmation from AoO: ' P_ZAOO INTO DOC_CHNG-OBJ_DESCR.

DOC_CHNG-OBJ_DESCR = 'Intragroup Confirmation from AoO '.

*...Body of the email

OBJTXT = 'Please find attached a summary and details for intragroup transactions for the referenced AoOs.'.

APPEND OBJTXT.

OBJTXT = 'Any queries regarding the attached should be addressed to the contact names on the Summary Report.'.

APPEND OBJTXT.

DESCRIBE TABLE OBJTXT LINES TAB_LINES.

READ TABLE OBJTXT INDEX TAB_LINES.

DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).

Creating the entry for the compressed document

CLEAR OBJPACK-TRANSF_BIN.

OBJPACK-HEAD_START = 1.

OBJPACK-HEAD_NUM = 0.

OBJPACK-BODY_START = 1.

OBJPACK-BODY_NUM = TAB_LINES.

OBJPACK-DOC_TYPE = 'RAW'.

APPEND OBJPACK.

DESCRIBE TABLE OBJBIN LINES TAB_LINES.

OBJHEAD = 'IG Balace.PDF'. APPEND OBJHEAD.

Creating the entry for the compressed attachment

OBJPACK-TRANSF_BIN = 'X'.

OBJPACK-HEAD_START = 1.

OBJPACK-HEAD_NUM = 1.

OBJPACK-BODY_START = 1.

OBJPACK-BODY_NUM = TAB_LINES.

OBJPACK-DOC_TYPE = 'PDF'.

OBJPACK-OBJ_NAME = 'ATTACHMENT'.

OBJPACK-OBJ_DESCR = 'IG Balance Report'.

OBJPACK-DOC_SIZE = TAB_LINES * 255.

APPEND OBJPACK..

Entering names in the distribution list

DATA: L_CNT TYPE I.

LOOP AT T_EMAIL INTO W_EMAIL.

IF W_EMAIL-ZCONTACT1 IS NOT INITIAL.

RECLIST-RECEIVER = W_EMAIL-ZCONTACT1.

RECLIST-REC_TYPE = 'U'.

L_CNT = L_CNT + 1.

ELSEIF W_EMAIL-ZCONTACT2 IS NOT INITIAL.

RECLIST-RECEIVER = W_EMAIL-ZCONTACT2.

RECLIST-REC_TYPE = 'U'.

L_CNT = L_CNT + 1.

ENDIF.

APPEND RECLIST.

CLEAR: RECLIST,

W_EMAIL.

ENDLOOP.

SELECT SINGLE ZAOO

ZCONTACT1

ZCONTACT2 FROM ZFI_MT_RPTRMAP INTO W_EMAIL

WHERE ZAOO EQ P_ZAOO.

IF W_EMAIL-ZCONTACT1 IS NOT INITIAL.

RECLIST-RECEIVER = W_EMAIL-ZCONTACT1.

RECLIST-REC_TYPE = 'U'.

L_CNT = L_CNT + 1.

APPEND RECLIST.

ELSEIF W_EMAIL-ZCONTACT2 IS NOT INITIAL.

RECLIST-RECEIVER = W_EMAIL-ZCONTACT2.

RECLIST-REC_TYPE = 'U'.

L_CNT = L_CNT + 1.

APPEND RECLIST.

ENDIF.

Sending the document

IF L_CNT > 0.

CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'

EXPORTING

DOCUMENT_DATA = DOC_CHNG

PUT_IN_OUTBOX = 'X'

COMMIT_WORK = 'X'

TABLES

PACKING_LIST = OBJPACK

OBJECT_HEADER = OBJHEAD

CONTENTS_BIN = OBJBIN

CONTENTS_TXT = OBJTXT

RECEIVERS = RECLIST

EXCEPTIONS

TOO_MANY_RECEIVERS = 1

DOCUMENT_NOT_SENT = 2

OPERATION_NO_AUTHORIZATION = 4

OTHERS = 99.

CASE SY-SUBRC.

WHEN 0.

WRITE 'Email sent successfully'.

WHEN 1.

WRITE: / 'no authorization to send to the specified number of recipients!'.

WHEN 2.

WRITE: / 'document could not be sent to any of the recipients!'.

WHEN 4.

WRITE: / 'no authorization to send !'.

WHEN OTHERS.

WRITE: / 'error occurred during sending !'.

ENDCASE.

ELSE.

MESSAGE S000 WITH TEXT-018.

STOP.

ENDIF.

*...Delete Spool Request.

DATA: SPOOLID TYPE TSP01_SP0R-RQID_CHAR.

SPOOLID = G_SPOOL_NUM.

CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'

EXPORTING

SPOOLID = SPOOLID

IMPORTING
RC =
STATUS =
ERROR_MESSAGE =

Re: SOST: Error Message cannot be processed as it cannot be converted

Former Member — Thu, 02 Oct 2008 13:20:46 GMT

I Sending XLS document to Email...using 4.6C version..

I am getting sy-subrc returned as Zero from FM SO_DOCUMENT_SEND_API1

But still I gettting Error message : Message cannot be processed as it cannot be converted in SOST.

and Email could not be sent.

Please guide..

Edited by: ksiva on Oct 2, 2008 6:56 PM

Re: SOST: Error Message cannot be processed as it cannot be converted

Former Member — Thu, 02 Oct 2008 15:04:30 GMT

Here is my code: Cna anyone find the error for sending XLS ..using here 4.6C..

*******Data Declarations*******************

DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0

WITH HEADER LINE...

DATA: it_attach TYPE STANDARD TABLE OF ldbpsjtab3000 INITIAL SIZE 0

WITH HEADER LINE.

DATA: lv_date(10),

lv_time(8).

DATA: BEGIN OF i_spreadsheet1 OCCURS 0,

field1(4), " Company Code

field2(60), " Profit Center

field3(100), " Cost Center

field4(15), " G/L Account

field5(11), " Invoice doc. number

field6(11), " Line item

field7(5), " Vendor

field8(8), " Name

field9(8), " Currency

field10(8), " Loc.curr.amount

field11(12), " Tax Code

END OF i_spreadsheet1.

CONSTANTS: con_tab TYPE x VALUE 'OA', "Horizontal tab

con_cret TYPE x VALUE 'OD'. "Carriage return

DATA: no TYPE i,

t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,

t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,

t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,

t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,

t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,

w_cnt TYPE i,

w_sent_all(1) TYPE c,

w_doc_data LIKE sodocchgi1,

gd_error TYPE sy-subrc,

gd_reciever TYPE sy-subrc,

ld_error TYPE sy-subrc,

ld_reciever TYPE sy-subrc,

ld_mtitle LIKE sodocchgi1-obj_descr,

ld_email LIKE somlreci1-receiver VALUE 'sKXXXX@BCDF',

ld_format TYPE so_obj_tp ,

ld_attdescription TYPE so_obj_des, "so_obj_nam ,

ld_attfilename TYPE so_obj_nam, "so_obj_des ,

ld_sender_address LIKE soextreci1-receiver,

ld_sender_address_type LIKE soextreci1-adr_typ,

ld_receiver LIKE sy-subrc.

FIELD-SYMBOLS <fs> TYPE ANY.

FIELD-SYMBOLS <fs1> TYPE ANY.

DATA: temp(500) TYPE c,

gd_attachment_desc TYPE so_obj_nam,

gd_attachment_name TYPE so_obj_des,

p_email1 LIKE somlreci1-receiver

VALUE 'SXXX@ABCDF',

p_sender LIKE somlreci1-receiver.

LOOP AT i_final INTO wa_final.

CLEAR: i_spreadsheet1.

AT FIRST.

CLEAR: i_spreadsheet1.

APPEND i_spreadsheet1.

CONCATENATE sy-datum+6(02)

'.'

sy-datum+4(02)

'.'

sy-datum+0(04) INTO lv_date.

i_spreadsheet1-field1 = 'Run Date'.

MOVE: lv_date TO i_spreadsheet1-field2.

APPEND i_spreadsheet1.

CLEAR: i_spreadsheet1.

CONCATENATE sy-uzeit+0(02)

':'

sy-uzeit+2(02)

':'

sy-uzeit+4(02) INTO lv_time.

i_spreadsheet1-field1 = 'Run Time'.

MOVE: lv_time TO i_spreadsheet1-field2.

APPEND i_spreadsheet1.

CLEAR: i_spreadsheet1.

APPEND i_spreadsheet1.

CLEAR: i_spreadsheet1.

Report output list coloums details

i_spreadsheet1-field1 = 'Condition Type'.

i_spreadsheet1-field2 = 'Access Sequence Description'.

i_spreadsheet1-field3 = 'Access Sequence Values'.

i_spreadsheet1-field4 = 'Scale Qty'.

i_spreadsheet1-field5 = 'Prev Value'.

i_spreadsheet1-field6 = 'Curr Value'.

i_spreadsheet1-field7 = 'Curr'.

i_spreadsheet1-field8 = 'Valid From'.

i_spreadsheet1-field9 = 'Valid To'.

i_spreadsheet1-field10 = 'Created Date'.

i_spreadsheet1-field11 = 'USER ID'.

APPEND i_spreadsheet1.

CLEAR: i_spreadsheet1.

APPEND i_spreadsheet1.

CLEAR: i_spreadsheet1.

ENDAT.

Output details records moving to excel sheet

MOVE wa_final-kschl TO i_spreadsheet1-field1.

MOVE wa_final-ddtext TO i_spreadsheet1-field2.

MOVE wa_final-reqvakey TO i_spreadsheet1-field3.

MOVE wa_final-kstbm TO i_spreadsheet1-field4.

MOVE wa_final-prevkbetr TO i_spreadsheet1-field5.

MOVE wa_final-kbetr TO i_spreadsheet1-field6.

MOVE wa_final-konwa TO i_spreadsheet1-field7.

MOVE wa_final-datab TO i_spreadsheet1-field8.

MOVE wa_final-datbi TO i_spreadsheet1-field9.

MOVE wa_final-erdat TO i_spreadsheet1-field10.

MOVE wa_final-ernam TO i_spreadsheet1-field11.

APPEND i_spreadsheet1.

ENDLOOP.

LOOP AT i_spreadsheet1.

CLEAR: temp, no.

DO 255 TIMES.

ADD 1 TO no.

ASSIGN COMPONENT no OF STRUCTURE i_spreadsheet1 TO <fs>.

CONCATENATE temp <fs> con_tab INTO temp.

CLEAR <fs>.

ENDDO.

MOVE temp TO it_attach-tabname3000.

CONCATENATE con_cret it_attach INTO it_attach.

APPEND it_attach.

CLEAR it_attach.

ENDLOOP.

***********************************

populate the email header message.

DATA: message TYPE char256.

message = 'Please find enclosed the output document'.

REFRESH it_message.

it_message = message.

APPEND it_message.

ld_mtitle = 'SAP Sample ouptut'.

ld_attdescription = 'SAP Output'.

ld_format = 'XLS'.

ld_attfilename = 'filename'.

ld_sender_address = space.

ld_sender_address_type = space.

ld_attfilename = 'filename'.

Fill the document data.

w_doc_data-doc_size = 1.

Populate the subject/generic message attributes

w_doc_data-obj_langu = sy-langu.

w_doc_data-obj_name = 'SAPRPT'.

w_doc_data-obj_descr = ld_mtitle .

w_doc_data-sensitivty = 'F'.

Fill the document data and get size of attachment

CLEAR w_doc_data.

DO 10 TIMES.

w_cnt = w_cnt + 1.

READ TABLE it_attach INDEX w_cnt.

w_doc_data-doc_size =

( w_cnt - 1 ) * 255 + STRLEN( it_attach ).

w_doc_data-obj_langu = sy-langu.

w_doc_data-obj_name = 'SAPRPT'.

w_doc_data-obj_descr = ld_mtitle.

w_doc_data-sensitivty = 'F'.

CLEAR t_attachment.

REFRESH t_attachment.

ENDDO.

t_attachment[] = it_attach[].

gd_attachment_desc = 'Attachname'.

Describe the body of the message

CLEAR t_packing_list.

REFRESH t_packing_list.

t_packing_list-transf_bin = space.

t_packing_list-head_start = 1.

t_packing_list-head_num = 0.

t_packing_list-body_start = 1.

DESCRIBE TABLE it_message LINES t_packing_list-body_num.

t_packing_list-doc_type = 'RAW'.

APPEND t_packing_list.

Create attachment notification

t_packing_list-transf_bin = 'X'.

t_packing_list-head_start = 1.

t_packing_list-head_num = 1.

t_packing_list-body_start = 1.

DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.

t_packing_list-doc_type = ld_format.

t_packing_list-obj_descr = ld_attdescription.

t_packing_list-obj_name = ld_attfilename.

t_packing_list-doc_size = t_packing_list-body_num * 255.

APPEND t_packing_list.

Add the recipients email address

CLEAR t_receivers.

REFRESH t_receivers.

t_receivers-receiver = ld_email.

t_receivers-rec_type = 'U'.

t_receivers-com_type = 'INT'.

t_receivers-notif_del = 'X'.

t_receivers-notif_ndel = 'X'.

APPEND t_receivers.

CALL FUNCTION 'SO_DOCUMENT_SEND_API1'

EXPORTING

document_data = w_doc_data

put_in_outbox = 'X'

sender_address = ld_sender_address

sender_address_type = ld_sender_address_type

commit_work = 'X'

IMPORTING

sent_to_all = w_sent_all

TABLES

packing_list = t_packing_list

contents_bin = t_attachment

contents_txt = it_message

receivers = t_receivers

EXCEPTIONS

too_many_receivers = 1

document_not_sent = 2

document_type_not_exist = 3

operation_no_authorization = 4

parameter_error = 5

x_error = 6

enqueue_error = 7

OTHERS = 8

IF sy-subrc = 0.

WAIT UP TO 2 SECONDS.

SUBMIT rsconn01 WITH mode = 'INT'

WITH output = 'X'

AND RETURN.

ENDIF.

Re: SOST: Error Message cannot be processed as it cannot be converted

Former Member — Thu, 02 Oct 2008 15:37:03 GMT

Hi Siva,

Checkout whether your services are maintained or not in the Txcode - SICF. That might help you.

Cheers!!