topic Re: send email in Application Development and Automation Discussions

send email

RahulKeshav — Thu, 18 Sep 2008 08:01:03 GMT

Hii All,

I have a report to display data in ALV grid display...

now i want to send this report thru email....to other person

can any one suggest me...

thnx

Rohit

Re: send email

Former Member — Thu, 18 Sep 2008 08:25:14 GMT

Please go through the following code on how to send a mail with report as a attachment:

REPORT  ZZ_SAMPL_MAIL1 NO STANDARD PAGE HEADING LINE-SIZE 200.

DATA : BEGIN OF ITAB OCCURS 0,
PERNR LIKE PA0001-PERNR,
ENAME LIKE PA0001-ENAME,
END OF ITAB.

DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
listobject LIKE abaplist OCCURS 10,
compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
w_object_hd_change LIKE sood1,
compressed_size LIKE sy-index.

START-OF-SELECTION.

SELECT PERNR ENAME
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM PA0001
WHERE PERNR < 50.

LOOP AT ITAB.
WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
SY-VLINE.
ENDLOOP.



receiver_list-recnam = sy-uname .
  receiver_list-esc_des = 'B'.
  APPEND receiver_list.


* General data
w_object_hd_change-objla = sy-langu.
w_object_hd_change-objnam = 'Object name'.
w_object_hd_change-objsns = 'P'.
* Mail subject
w_object_hd_change-objdes = 'Message subject'.

* Mail body
APPEND 'Message content' TO message_content.

* Attachment
CALL FUNCTION 'SAVE_LIST'
EXPORTING
list_index = '0'
TABLES
listobject = listobject.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
compressed_size = compressed_size
TABLES
in = listobject
out = compressed_attachment.
DESCRIBE TABLE compressed_attachment.
CLEAR packing_list.
packing_list-transf_bin = 'X'.
packing_list-head_start = 0.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = sy-tfill.
packing_list-objtp = 'RAW'.
packing_list-objnam = 'Object name'.
packing_list-objdes = 'Attachment description'.
packing_list-objlen = compressed_size.
APPEND packing_list.

CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = w_object_hd_change
object_type = 'DOC'
owner = sy-uname
TABLES
objcont = message_content
receivers = receiver_list
packing_list = packing_list
att_cont = compressed_attachment.

Regards,

Vishwa.

Re: send email

Former Member — Thu, 18 Sep 2008 08:28:42 GMT

Hi Rohit,

This topic has been discussed in the following thread. Just check this once:

Regards,

Chandra Sekhar

Re: send email

Former Member — Thu, 18 Sep 2008 08:50:38 GMT

Hi Rohit.

Did U try the code which I sent you earlier... Please let me know the status.

Regards,

Vishwa.

Re: send email

RahulKeshav — Thu, 18 Sep 2008 09:32:01 GMT

sorry vishwa ..i jst reached....let m try

Re: send email

RahulKeshav — Thu, 18 Sep 2008 09:42:35 GMT

vishwa ...as you have used save_list ....it will not work during background processing....

Re: send email

RahulKeshav — Thu, 18 Sep 2008 12:58:59 GMT

Hi,,

Itried that bt i didnt get any mail...

do we have ot do some config in SAP..

plz let me knw..

Thnx

Rohit

Re: send email

Former Member — Thu, 18 Sep 2008 13:25:26 GMT

Just try the modification to the above code.. and check your business workplace also once.

CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = w_object_hd_change
object_type = 'DOC'
owner = sy-uname
TABLES
objcont = message_content
receivers = receiver_list
packing_list = packing_list
att_cont = compressed_attachment.
if sy-subrc eq 0.
commit work.
call function 'SO_DEQUEUE_UPDATE_LOCKS'.
endif.

Edited by: Vijay Babu Dudla on Sep 18, 2008 9:25 AM

Re: send email

RahulKeshav — Fri, 19 Sep 2008 05:04:45 GMT

Hi all,

i am using the following code.:

DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE,

OBJHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE,

OBJBIN LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE,

OBJTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE,

RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE,

DOC_CHNG LIKE SODOCCHGI1,

TAB_LINES LIKE SY-TABIX,

S_OBJ LIKE SOXOBJ,

DESCR(50) TYPE C.

Prepare the body of the mail

DOC_CHNG-OBJ_NAME = 'CHECK_IN'.

DOC_CHNG-OBJ_DESCR = 'test'.

OBJTXT = 'Hi,'.

APPEND OBJTXT.

CLEAR OBJTXT.

APPEND OBJTXT.

OBJTXT = 'Best Regards,'.

APPEND OBJTXT.

OBJTXT = 'Workflow System.'.

APPEND OBJTXT.

ENTERING NAMES IN THE DISTRIBUTION LIST

RECLIST-RECEIVER = email id.

RECLIST-REC_TYPE = 'U'.

APPEND RECLIST.

DESCRIBE TABLE OBJTXT LINES TAB_LINES.

READ TABLE OBJTXT INDEX TAB_LINES.

DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).

Creating the entry for the compressed document

CLEAR OBJPACK-TRANSF_BIN.

OBJPACK-HEAD_START = 1.

OBJPACK-HEAD_NUM = 0.

OBJPACK-BODY_START = 1.

OBJPACK-BODY_NUM = TAB_LINES.

OBJPACK-DOC_TYPE = 'RAW'.

APPEND OBJPACK.

Sending the document

CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'

EXPORTING

DOCUMENT_DATA = DOC_CHNG

PUT_IN_OUTBOX = 'X'

COMMIT_WORK = 'X'

TABLES

PACKING_LIST = OBJPACK

OBJECT_HEADER = OBJHEAD

CONTENTS_BIN = OBJBIN

CONTENTS_TXT = OBJTXT

RECEIVERS = RECLIST

EXCEPTIONS

TOO_MANY_RECEIVERS = 1

DOCUMENT_NOT_SENT = 2

OPERATION_NO_AUTHORIZATION = 4

OTHERS = 99.

if sy-subrc eq 0.

endif.

it is working .....but it is not sending email directly....

once it is executed....i hav to go to SCOT then execute ,,,then only it is sending mail....

plz help me in that...

do i need to do some config or i have to change the code..

thnx

Rohit

Edited by: Rohit Kumar on Sep 19, 2008 10:35 AM

Re: send email

RahulKeshav — Fri, 19 Sep 2008 11:22:01 GMT

Hi All,

now i am able to send the email with attachement of .DOC type.....

i have data in itab ...i want to send it attachement as excel format...

can it be possible...

plz help....

Re: send email

Former Member — Fri, 19 Sep 2008 11:30:18 GMT

check in SDN with excel as mail attachment. you can find many examples and posts related.

Re: send email

Former Member — Fri, 19 Sep 2008 11:37:16 GMT

hi rohith..

Check this code to send in xls format:

PARAMETERS: p_email   TYPE somlreci1-receiver.
                                  

TYPES: BEGIN OF t_ekpo,
  ebeln TYPE ekpo-ebeln,
  ebelp TYPE ekpo-ebelp,
  aedat TYPE ekpo-aedat,
  matnr TYPE ekpo-matnr,
 END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
      wa_ekpo TYPE t_ekpo.

TYPES: BEGIN OF t_charekpo,
  ebeln(10) TYPE c,
  ebelp(5)  TYPE c,
  aedat(8)  TYPE c,
  matnr(18) TYPE c,
 END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.

DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.

DATA:   t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
        t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
        t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        w_cnt TYPE i,
        w_sent_all(1) TYPE c,
        w_doc_data LIKE sodocchgi1,
        gd_error    TYPE sy-subrc,
        gd_reciever TYPE sy-subrc.


************************************************************************
*START_OF_SELECTION
START-OF-SELECTION.
*   Retrieve sample data from table ekpo
  PERFORM data_retrieval.

*   Populate table with detaisl to be entered into .xls file
  PERFORM build_xls_data_table.


************************************************************************
*END-OF-SELECTION
END-OF-SELECTION.
* Populate message body text
  perform populate_email_message_body.

* Send file by email as .xls speadsheet
  PERFORM send_file_as_email_attachment
                               tables it_message
                                      it_attach
                                using p_email
                                      'Example .xls documnet attachment'
                                      'XLS'
                                      'filename'
                                      ' '
                                      ' '
                                      ' '
                             changing gd_error
                                      gd_reciever.

*   Instructs mail send program for SAPCONNECT to send email(rsconn01)
  PERFORM initiate_mail_execute_program.


*&---------------------------------------------------------------------*
*&      Form  DATA_RETRIEVAL
*&---------------------------------------------------------------------*
*       Retrieve data form EKPO table and populate itab it_ekko
*----------------------------------------------------------------------*
FORM data_retrieval.
  SELECT ebeln ebelp aedat matnr
   UP TO 10 ROWS
    FROM ekpo
    INTO TABLE it_ekpo.
ENDFORM.                    " DATA_RETRIEVAL


*&---------------------------------------------------------------------*
*&      Form  BUILD_XLS_DATA_TABLE
*&---------------------------------------------------------------------*
*       Build data table for .xls document
*----------------------------------------------------------------------*
FORM build_xls_data_table.
  data: ld_store(50) type c.  "Leading zeros

*  CONSTANTS: con_cret(2) TYPE c VALUE '0D',  "OK for non Unicode
*             con_tab(2) TYPE c VALUE '09'.   "OK for non Unicode

*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
constants:
    con_tab  type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
    con_cret type c value cl_abap_char_utilities=>CR_LF.


  CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
         INTO it_attach SEPARATED BY con_tab.
  CONCATENATE con_cret it_attach  INTO it_attach.
  APPEND  it_attach.

  LOOP AT it_ekpo INTO wa_charekpo.
*Modification to retain leading zeros
*   inserts code for excell REPLACE command into ld_store
*   =REPLACE("00100",1,5,"00100")
    concatenate '=REPLACE("' wa_charekpo-ebelp '",1,5,"'
                             wa_charekpo-ebelp '")' into ld_store .

*   concatenate ld_store into .xls file instead of actual value(ebelp)
    CONCATENATE wa_charekpo-ebeln ld_store
*End of modification
                wa_charekpo-aedat wa_charekpo-matnr
           INTO it_attach SEPARATED BY con_tab.
    CONCATENATE con_cret it_attach  INTO it_attach.
  WRITE: / wa_charekpo-ebelp, wa_charekpo-ebeln, wa_charekpo-matnr,wa_charekpo-aedat.
    APPEND  it_attach.
  ENDLOOP.
ENDFORM.                    " BUILD_XLS_DATA_TABLE


*&---------------------------------------------------------------------*
*&      Form  SEND_FILE_AS_EMAIL_ATTACHMENT
*&---------------------------------------------------------------------*
*       Send email
*----------------------------------------------------------------------*
FORM send_file_as_email_attachment tables pit_message
                                          pit_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.


  DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE  somlreci1-receiver,
        ld_format TYPE  so_obj_tp ,
        ld_attdescription TYPE  so_obj_nam ,
        ld_attfilename TYPE  so_obj_des ,
        ld_sender_address LIKE  soextreci1-receiver,
        ld_sender_address_type LIKE  soextreci1-adr_typ,
        ld_receiver LIKE  sy-subrc.

  ld_email   = p_email.
  ld_mtitle = p_mtitle.
  ld_format              = p_format.
  ld_attdescription      = p_attdescription.
  ld_attfilename         = p_filename.
  ld_sender_address      = p_sender_address.
  ld_sender_address_type = p_sender_addres_type.


* Fill the document data.
  w_doc_data-doc_size = 1.

* Populate the subject/generic message attributes
  w_doc_data-obj_langu = sy-langu.
  w_doc_data-obj_name  = 'SAPRPT'.
  w_doc_data-obj_descr = ld_mtitle .
  w_doc_data-sensitivty = 'O'.

* Fill the document data and get size of attachment
  CLEAR w_doc_data.
  READ TABLE it_attach INDEX w_cnt.
  w_doc_data-doc_size = ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
  w_doc_data-obj_langu  = sy-langu.
  w_doc_data-obj_name   = 'SAPRPT'.
  w_doc_data-obj_descr  = ld_mtitle.
  w_doc_data-sensitivty = 'O'.
  CLEAR t_attachment.
  REFRESH t_attachment.
  t_attachment[] = pit_attach[].

* Describe the body of the message
  CLEAR t_packing_list.
  REFRESH t_packing_list.
  t_packing_list-transf_bin = space.
  t_packing_list-head_start = 1.
  t_packing_list-head_num = 0.
  t_packing_list-body_start = 1.
  DESCRIBE TABLE it_message LINES t_packing_list-body_num.
  t_packing_list-doc_type = 'RAW'.
  APPEND t_packing_list.

* Create attachment notification
  t_packing_list-transf_bin = 'X'.
  t_packing_list-head_start = 1.
  t_packing_list-head_num   = 1.
  t_packing_list-body_start = 1.

  DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
  t_packing_list-doc_type   =  ld_format.
  t_packing_list-obj_descr  =  ld_attdescription.
  t_packing_list-obj_name   =  ld_attfilename.
  t_packing_list-doc_size   =  t_packing_list-body_num * 255.
  APPEND t_packing_list.

* Add the recipients email address
  CLEAR t_receivers.
  REFRESH t_receivers.
*  t_receivers-receiver = ld_email.
*  t_receivers-rec_type = 'U'.
*  t_receivers-com_type = 'INT'.
*  t_receivers-notif_del = 'X'.
*  t_receivers-notif_ndel = 'X'.
*  APPEND t_receivers.
t_receivers-receiver = sy-uname.
t_receivers-rec_type = 'B'.
APPEND t_receivers.

  CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.

* Populate zerror return code
  ld_error = sy-subrc.

* Populate zreceiver return code
  LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
  ENDLOOP.
ENDFORM.


*&---------------------------------------------------------------------*
*&      Form  INITIATE_MAIL_EXECUTE_PROGRAM
*&---------------------------------------------------------------------*
*       Instructs mail send program for SAPCONNECT to send email.
*----------------------------------------------------------------------*
FORM initiate_mail_execute_program.
  WAIT UP TO 2 SECONDS.
  SUBMIT rsconn01 WITH mode = 'INT'
                WITH output = 'X'
                AND RETURN.
ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM


*&---------------------------------------------------------------------*
*&      Form  POPULATE_EMAIL_MESSAGE_BODY
*&---------------------------------------------------------------------*
*        Populate message body text
*----------------------------------------------------------------------*
form populate_email_message_body.
  REFRESH it_message.
  it_message = 'Please find attached a list test ekpo records'.
  APPEND it_message.
endform.                    " POPULATE_EMAIL_MESSAGE_BODY